Coverage Calculator
DIAMOND HARD SOLUTIONS
Epoxy & Coating Calculator
Estimate coating kits, base-coat pigment pods, and flake or quartz broadcast material.
Project Details
Pigment pods are only calculated for base coats.
8 mils is included in the quick calculator. If a product's current TDS does not publish an 8-mil coverage rate, the calculator uses a clearly marked theoretical 100%-solids yield of about 200 sq. ft./gal.
Estimated Results
Total Area
0
sq. ft.
Coverage
—
Material Required
0
US gallons
Recommended Purchase
—
Universal Pigment Pods — Base Coat Only
—
Important: This is an estimating tool. Always confirm the current Labsurface TDS and the actual project specification before ordering.
Build Your Floor System
Broadcast Material
System Estimate
A typical system is 2–3 coating layers. Mark only the actual pigmented layer as “Base Coat”; topcoats will not receive pigment pods.
Broadcast note: 1/4" flake is calculated at 1 lb per 10 sq. ft. Quartz is calculated at 13 lb per 10 sq. ft. per broadcast, with two broadcasts automatically included.